Photocell lighting control switch with adjustment 0÷1.000 lux - 1 DIN High performance with minimum dimensions for controlling inductive loads like fluorescent lamps or LEDs

• Power supply: 230V a.c. +/- 10%, 50 Hz
• Type of output: relay with NO potential free contacts
• (Cadmium free) 16A / 250V a.c. with zero crossing
• Maximum wire section at terminals: 1 mm² ÷ 6 mm²
• Threshold intervention (lux) adjustment: 0÷1.000 Lux
• Double adjustment scale
• Delay in switching on / off to avoid false switching:
• ON delay: 15 seconds / OFF delay: 30 seconds
• LED operating status
• Cadmium free relay
• Dimensions module (L x W x H): 17,5 x 60 x 90 mm
• Probe with Cadmium free precision photodiode sensor
• anti-UV opaline housing
• Protection degree IP 65
• Dimensions probe (L x W x H): 28 x 48 x 56 mm

Photocell lighting control switch model “FEBO” for wall-mounting and/or pole installation. The factory 10 LUX calibration prevents difficult interventions by the installer

• Power supply 230V a.c. 50 / 60Hz
• Outdoor installation
• Output 1 polarized NO contact: 16 (2) A/250Va.c.
• Connection with cables up to 2.5 mm2
• Wiring with shielded cable diameter 7-11 mm
• Pre-calibrated at the factory at 10 Lux ± 20%
• Intervention threshold adjustment trimmer, 2 - 200 Lux
• Threshold signalling LED
• Anti-UV opaline housing
• Protection degree IP 65
• Dimensions (L x W x H) 55 x 45 x 106 mm