In conjunction with Pt100, Pt1000 or KTY 83/84 temperature sensors or thermocouples provide a temperature linear DC 0-10V or 0/4-20mA output signal.

With electronics integrated into the housing. Measuring ranges up to AC 100A.

Analogue outputs 0-20mA, 4-20mA. RS485 interface (Modbus RTU), frequency output (transistor) for direct evaluation with the digital input of a PLC.

For measuring AC voltages from 30 to 600V and alternating currents from 1 to 5A (larger currents via current transformers) insulated outputs 0-10V, 0/4-20mA.

For connection of up to 16 Pt100, 0-10V or 0-20mAmeasuring points to one evaluation unit.

The inputs can be selected in digital code, e.g. using a PLC. Automatic operation is possible.

For conversion and galvanic isolation of DC signals. Universal measuring transducers are available with DC 0…±60/150/300mV (scalable) 1/5A, 0/4-20mA measuring inputs and 0-10V, 0/4-20mA outputs.

Measure the temperature at the input sensor (Pt100, Pt1000, KTY 83/84, thermocouples B, E, J, K, L, N, R, S or T) and convert the signal into up to 4 isolated Pt100 output signals. RS485 interface for use as a Pt100 simulator.

For Pt 100 as a superior alternative to PTC thermistor protection, installed in the motor terminal box and fed via a 4-20mA loop, switching points, hysteresis and the reclosing behavior can be freely determined with a PLC in the range of 0 to 2000 C.

Monitor standard 0/40-20mA or 0-10V signals from any transducer for compliance with 1 or 2 limit values.